Free tool · printable

Under-Sink Layout Planner

Quick answer

The planner turns your measurements into a zone-by-zone plan: what to buy for each lane (with exact size targets), what to store there, and what to leave clear. Print it as a one-page sheet and take it shopping.

  1. 1

    Cabinet dimensions

    Inside measurements, in inches
    Start from:
    in

    Wall to wall inside the cabinet.

    in

    Front lip to the first thing on the back wall.

    in

    Cabinet floor to the lowest bend, not to the sink.

    in

    With doors fully open, hinge to frame.

    Doors & back wall (optional)
    Center stile between doors?

    The fixed vertical strip on some double-door cabinets.

    On the back wall

    Reduces usable depth in the result.

  2. 2

    Plumbing layout

    Open the doors and look
    Where is the P-trap?
    How low does the trap hang?
    Garbage disposal?
  3. 3

    Room & preference

    Tunes the shortlist, not the physics
    Cabinet type
    Organizer style you lean toward
How to take these measurements

Uses a 0.5 in safety margin on width and depth. Estimates only: measure again before ordering.

Shopping targets for this plan

Disclosure: as an Amazon Associate, this site may earn from qualifying purchases. Links below search Amazon for a size class; no prices or reviews are shown here.

Size classShop at or underFitWhere it goesNotesLink
Slim side basketvery narrow, 5-6 in lanes 5.5 in W × 14 in D × 10 in H Likely fit Left zone Rescues the sliver of space beside offset plumbing. plumbing position unknown. Small capacity: best for brushes and refill packs stored upright. Search this size
Stackable binnarrow, 5-7 in lanes 6 in W × 14 in D × 7 in H Likely fit Left zone Fits the tight lane every other class gives up on; rental-safe. plumbing position unknown. Buy open-front: the lower bin must stay reachable without unstacking. Search this size
Slide-out drawernarrow, for 6.5-8 in lanes 8 in W × 16 in D × 13 in H Likely fit Left zone Daily-access winner for a clear side lane beside the trap or disposal. plumbing position unknown. Rails need about 0.25 in of side play and a clear travel path front to back. Search this size
Compact two-tier shelfside-lane, 7.5-10 in wide 8 in W × 15 in D × 14 in H Likely fit Left zone Doubles shelf area in one lane without any mounting. plumbing position unknown. Check lower-tier clearance against your tallest daily bottle. Search this size
Shallow vanity binsmall-format, low vanities 8 in W × 10 in D × 5 in H Likely fit Left zone Sized for low-bend vanities and 13-15 in door openings. compact class; will not use the full cabinet; plumbing position unknown. Made for vanities; wastes space in a full-depth kitchen base. Search this size
Stackable binstandard, 8-11 in lanes 9 in W × 13 in D × 8 in H Likely fit Front strip The zero-risk default for any plumbing layout. plumbing position unknown. Stack two high at most; the top bin needs 1 in of lift-out room. Search this size
Cleaning caddycarry kit, handle included 10 in W × 13 in D × 11 in H Likely fit Largest clear zone The grab-and-go zone: parks front-center of the widest lane. plumbing position unknown. Height listed with handle: the handle must clear the bend on lift-out. Search this size
Low turntableflat, spins under the bend 10 in W × 10 in D × 3.5 in H Likely fit Front strip Puts small bottles a spin away in heights nothing else uses. plumbing position unknown. Keep it off the trap ring: the spin needs a flat clear footprint. Search this size

Common questions

How is the planner different from the fit checker?

The checker answers "what size fits"; the planner answers "what goes where": it assigns each zone a role, a size target and suggested contents, and formats it as a printable plan.

Can I print or save the plan?

Yes. The print button produces a clean one-page layout sheet with your measurements, the zone map and the shopping targets, ready for the store or the tape measure.

Why does my plan skip a zone?

Zones under practical minimums are dropped: side lanes below about 4.5 in and front strips below 4 in of height hold nothing worth buying for, so the plan reallocates.

Does the plan include exact products?

It includes size targets per zone and links that search for each class at that size. The final pick is yours, checked against the spec table.